Commercial and industrial fans are designed for a variety of purposes. These fans are used in factories to provide air movement, ventilation, and cooling. Industrial fans are also used in offices to provide cool air and reduce energy costs.
HVLS fans are available in a wide range of sizes, from small pedestal fans mounted on a desk or table to large pull-down fans mounted under windows or on ceilings. They come in many different styles, including stick-type, box-type, and pedestal models.
What to Consider When Buying Commercial and Industrial Fans
Total airflow
Total airflow is the most important factor in choosing a commercial or industrial fan. Fans should have at least 10% more airflow than their rated capacity. This means that if a fan is rated at 100 CFM, it should have an actual air speed of 110 CFM or higher. This will keep you cool during hot summer days and will also help keep your building cool in the winter months.
Consider getting one with multiple speeds or adjustable tilt angle settings to get the most out of your fan. This will allow you to control how much air passes through your room from inside out, depending on what’s going on outside your window or door frame.
Static pressure
Static pressure is the amount of air that a fan will force out of its enclosed area. This is measured in inches of water column (I.O.C.), and it is an integral factor in determining how much power your fan will require to move air through your building.
Static pressure is measured when the fan has no active component, such as the motor, bearings, or blades. The higher the static pressure, the more powerful your fan will be. But it will also be more expensive to operate because fans with high static pressures need fewer driveshafts and bearings than those with lower static pressures.
Static pressure can also be defined as the pressure exerted by a fan on one side of an air duct when turned off and all other components are removed from the system.
Noise Level
Noise regulations vary from country to country, but fans with noise levels below 65 decibels are generally considered acceptable and can be used in most environments without issue. The higher the noise level, the higher the energy needed to move that same amount of air, which means you’re using more electricity and costing yourself some money.
Size
Thanks to advancements in technology and materials, fan size isn’t as important as it once was, but there are still some things to consider when choosing your fan’s size. Air movement depends on velocity and area. Therefore, larger fans have more surface area to push through and move more air per second than smaller ones.
Altitude
Commercial and industrial buildings are often located at higher altitudes than homes. Therefore, fans will be subjected to more extreme conditions than in a residential setting. If you’re installing a fan in an office building, for example, it’s imperative that you choose one that can handle the more extreme temperatures that come with being so high up in the air.
Ease of cleaning
Commercial and industrial fans often have more nooks and crannies than residential models, which can be hard to clean. Commercial fans are also typically used in locations where dust is a concern, so they need to be easy to clean. If you’re looking for a fan that can be cleaned easily, look for one that has a removable grill or shroud. You should also be able to remove the blades if you need to clean them.
Electricity amount
When you are buying a commercial and industrial fan, consider the amount of electricity it will consume. The efficiency of the fan plays a vital role in determining its energy efficiency. A high-efficiency fan will save you money on your utility bills and reduce carbon emissions by reducing the amount of electricity needed by the fan to run.
Key Takeaway
To select the best commercial or industrial fan, consider the kind of product to be acquired. It is crucial to select a fan that is in keeping with the market’s requirements and have a look at its set of features. Also, don’t forget about the cost.
